ABB EVLUNIC PRO M Configuration Manual page 34

DSW1.4 to DSW1.5
Current
25 A
35 A
50 A
63 A
Information
Changes to the DIP switch settings only become effective after a restart of the charging station!
To restart, press the "Service button" until the first signal tone sounds (approx. 1 second) or switch off
the charging station for a short time via the line circuit breaker.
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
Figure
DOCUMENT ID.
TBA
CHARG ING STATIO N
REV. LANG. PAGE
A EN 34/37