ABB EVLUNIC PRO M Configuration Manual page 36

5.2.1. Software update via web interface
—
Fig. 5-9: Web interface software update
To perform a software update via the web interface, proceed as follows:
1. Download the current software for the charging station (*.keb file).
2. Log into the web interface of the charging station.
3. In the main menu under "System" select the item "Software Update".
4. Upload the current software using the "Choose a file ..." button.
5. Start the update process with the "Upload & Install" button.
5.2.2. Software update via USB stick
For a software update via USB stick, this feature must be activated in the configuration (web interface).
To perform a software update via a USB stick, proceed as follows:
1. Download the current software for the charging station (*.keb file).
2. Plug the USB stick into a PC.
3. Format the USB stick with FAT32.
4. Create a new directory on the USB stick with the name "UPD".
5. Copy the downloaded *.keb file into the "UPD" directory.
6. Connect the USB stick to the USB interface of the charging station. The update starts automatically.
5.2.3. Software update via OCPP backend
The software update for the entire charging network can be performed via the OCPP backend.
To perform the software update an FTP link is required. The information downloaded from the ABB
website along with the software update contains the FTP link.
For details on using the FTP link, see the OCPP backend manual.
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
DOCUMENT ID.
TBA
CHARG ING STATIO N
REV. LANG. PAGE
A EN 36/37