Table of Contents
Advertisement
Figure 9-32: Cold restart using the device loader
9.5.7
Cold restart from terminal mode
This procedure performs the cold start from the terminal mode. It causes the device to restart using the
startup (cold) configuration.
Perform the procedure on either a local or remote connection. However, ABB highly recommends local cold
restarts with this method. Invoke Terminal mode from entry mode or from the PCCU main screen. This
method of cold restart requires command entry.
NOTICE – Data Loss. Perform the procedures in section
before a cold start. This avoids loss of the data and the need for a complete system reconfiguration.
If the startup (cold) configuration does not have the latest network connection configuration, the
restart causes loss of network connectivity. Update the startup configuration (tfCold) to avoid loss of
network connection and required reconfiguration.
To restart from terminal mode:
172 | XIO USER MANUAL | 2106424MNAA
9.1 Preserve data and configuration
Hide quick links:
Advertisement
Table of Contents
