Figure 4-4: PCCU installation software revisions list
4.2
Install PCCU32
PCCU32 software operates in a Windows
To install a PCCU32 installation file downloaded from the ABB website:
4.3
Establish local communication
Connect the laptop to the USB or Ethernet ports to establish initial local communication. These ports are
configured at the factory for local operator access. Configure PCCU to use any of these ports.
–
To use USB, see section
–
To use Ethernet, see section
IMPORTANT NOTE: External weatherproof local communication connectors (USB or Ethernet) are
available on XCORE enclosures, if purchased. Use external ports to connect locally if the XIO is
inside an enclosure. If the XIO is a standalone device, use the USB or Ethernet ports.
Do not use external enclosure connectors for permanent field connections. These connectors are
only for local access during configuration or maintenance.
4.3.1
Using the USB port
The following instructions apply to USB port connections.
to connect to the USB port.
®
environment.
4.3.1 Using the USB port
4.3.2 Using the Ethernet ports
Table 4-1: USB cabling
XIO USER MANUAL | 2106424MNAA | 37
provides cabling details