Warm Restart From The Device Loader - ABB XIO-08 User Manual

This procedure uses the RESET button on the XIO to restart the device. It causes the device to restart
with the running (warm) configuration. If the XIO is installed inside an enclosure, you must have access to
the interior of the enclosure to access the XIO reset button.
To complete a warm restart using the reset button:
Figure 9-27: Security switch
Legend: Security switch
ID Description
1 Security switch
2 Reset (paperclip actuated)
3
Cold (paperclip actuated)
IMPORTANT NOTE: If the XIO does not restart, press and hold the Reset button for eight
seconds.
9.5.3

Warm restart from the device loader

This procedure performs the warm restart from the 32-bit loader. The procedure can be performed while
on a local or remote loader connection.
The procedure causes the device to restart with the running (warm) configuration.
To complete a warm restart from the device loader:
XIO USER MANUAL | 2106424MNAA | 169