ABB XIO-08 User Manual page 89

IMPORTANT NOTE: The Valve Control TFIO module is not supported by the XIO at initial
product release. Support for this module is planned with future flash upgrades. Contact ABB
technical support for additional information.
DANGER – Serious damage to health / risk to life. Do not perform any wiring or
removal/insertion of modules unless it is known that a potentially explosive atmosphere
condition does not exist.
These instructions do not address the requirements for installations in potentially explosive
atmospheres.
Wiring between the XIO, TFIO modules and field equipment must meet the requirements for
installation in accordance with the local and national electrical codes.
IMPORTANT NOTE: This procedure assumes that the XIO power and TFIO-IO modular
connectors have been correctly wired. The XIO and I/O connectors can be attached or removed
without removal of wiring. Always remove the wired connectors attached to the TFIO modules
prior to insertion or removal on the XIO.
To connect modules:
Figure 4-76: TFIO to XIO connections
Legend: TFIO to XIO connections
# Name
1 Side of TFIO
2 Face of TFIO
3 XIO
# Name
4 Side view of connections
5 Face view of connections
XIO USER MANUAL | 2106424MNAA | 89