Cold Restart From The Device Loader - ABB XIO-08 User Manual

To restart the controller using terminal mode:
Figure 9-30: Terminal menu option
Figure 9-31: Terminal mode warm restart
9.5.6

Cold restart from the device loader

This procedure performs the cold start from the 32-bit loader. Follow this procedure on a local or remote
loader connection. However, ABB highly recommends performing the cold restart locally. The cold restart
causes the device to restart using the startup (cold) configuration.
NOTICE – Data Loss. Perform the procedures in section
before a cold start. This avoids loss of the data and the need for a complete system reconfiguration.
If the startup (cold) configuration does not have the latest network connection configuration, the
restart causes loss of network connectivity. Update the startup configuration (tfCold) to avoid loss of
network connection and required reconfiguration.
To complete a cold restart using the startup (cold) configuration:
9.1 Preserve data and configuration
XIO USER MANUAL | 2106424MNAA | 171