Factory Restart From The Device Loader - ABB XIO-08 User Manual

Figure 9-33: Terminal menu option
Figure 9-34: Terminal screen – cold boot
9.5.8

Factory restart from the device loader

This procedure uses the 32-bit loader to restore the device's startup configuration to its factory defaults.
Factory defaults can include a generic base configuration or a custom configuration. Customers can
request custom configurations to address specific requirements in addition to the basic configuration.
Restoring to factory configuration on a device already in-service causes service disruption and loss of
network connectivity.
NOTICE – Loss of data. A restart with factory defaults deletes all data and previous
configurations. Current startup and running configurations are lost. Network communication
parameters are overwritten with factory defaults as well. Perform the procedures in section
Preserve data and configuration
the restart remotely on a network connection because the device might lose connectivity. Physical
access to the device is required to reconfigure.
To restore factory configuration:
before restoring factory defaults. We do not recommend triggering
XIO USER MANUAL | 2106424MNAA | 173
9.1