Hard Wiring Options - Assa Abloy Corbin Russwin Access 800 Series Installation Instructions Manual

6) CL33800 Hard Wiring Instructions
Hardwiring options include one or a combination of the following: M861
Forced Door Propped Door Option, M35 Power/Remote Unlocking Harness
6.1) Important
1. Caution: Disconnect all input power before beginning installation to prevent electrical shock
and equipment damage.
2. Installer must be a trained, experienced service person.
3. All wiring must comply with applicable local electrical codes, ordinances and regulations.
6.2) Installation Notes
1. With new applications, an ElectroLynx door harness with 8 and 4 pin connectors will be pre-
installed inside door by ASSA ABLOY door manufacturer when specified during ordering
process.
2. Wiring to pigtail harness is per facility wiring requirement. ElectroLynx connector
terminations and wire colors all match.
3. If door does not have an ElectroLynx type door harness, cut connectors off product and hard
wire, or consult factory for appropriate mating harness.
®
6.3) ElectroLynx Connector System Notes:
The system is designed to be installation friendly with pluggable connectors from the electric
hinge through the door to the rail. The only wiring required is to the loose wires on the pigtail
harness assembly on the frame side of the electric hinge.
IMPORTANT:
The plug and receptacle connectors are designed to mate and lock together as shown in the
figure. Plug the connectors into each other with the locking mechanism aligned as indicated.
Do NOT Force connectors on any other way.
Receptacle
®
®
Locking Mechanism
Plug
14
®
®
Hardwiring Made Easy
ELECTRO
As part of their promise to provide
innovative, fast and effective high
security solutions to their customers,
certain ASSA ABLOY Group brands offer
®
ElectroLynx , a universal quick-connect
system that simplifies the electrification of
the door opening.
ElectroLynx® is a registered trademark of ASSA ABLOY Inc.
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®
ASSA ABLOY