Assa Abloy Corbin Russwin Access 800 Series Installation Instructions Manual page 17

Hide thumbs Also See for Corbin Russwin Access 800 Series:

6) CL33800 Hard Wiring Instructions

Installation:

ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 3)

a. Look for the mating part on ASSA ABLOY doors and frames. Then plug in all

connectors as shown in Fig. 3 during product installation.

b. Hard wire 784 power supply as shown.

Non-ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 3)

a. Cut the 8-pin connector off the Power/Remote Unlocking harness and hard wire

to non-ElectroLynx door harness. Remote power requires three conductors and

remote unlock requires two conductors.

b. Hard wire door harness to power transfer device.

c. Hard wire 784 power supply as shown.

ASSA ABLOY

ElectroLynx® is a registered trademark of ASSA ABLOY Inc.

Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

Table of Contents