Assa Abloy Corbin Russwin Access 800 Series Installation Instructions Manual page 19

Hide thumbs Also See for Corbin Russwin Access 800 Series:

6) CL33800 Hard Wiring Instructions

Installation:

1. ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 4)

a. Look for the mating part on ASSA ABLOY doors and frames. Then plug in all

connectors as shown in Fig. 4 during product installation.

b. Hard wire forced/propped, hard power and/or remote unlock (REX) as shown.

2. Non-ElectroLynx System Wiring Instructions (refer to Fig. 1 and Fig. 4)

a. Cut the 8-pin connector off the Power/Remote Unlock harness and hard wire

to non-ElectroLynx door harness. Remote power requires three conductors

and remote unlock requires two conductors.

b. Hard wire door harness to power transfer device.

c. Hard wire forced/propped, hard power and/or remote unlock (REX), as shown.

ASSA ABLOY

ElectroLynx® is a registered trademark of ASSA ABLOY Inc.

Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.

Table of Contents