Wiring Diagrams - Assa Abloy Corbin Russwin SN200 Series Installation Instructions Manual

Product 8 PIN CONNECTOR
1-Black 2-Red
ACCESS CONTROL DEVICES: SN200/210 Lockset, ElectroLynx wire Color / Function assignments
12VDC
(Reader)
SN200 (UL294)
SN200 NEG POS
SN210
*Diagrams on following pages
If your lock is configured with End of Line Resistors, reference instruction sheet FM406 for the wiring of RX & DPS outputs.
Wiegand Operation Mode:
• Red LED 'ON' when powered.
• Presenting a compatible credential causes LED to briefly turn green and then return to
red state.
UL294 / TAMPER Configuration:
• Connect Yellow TAMPER wire from ElectroLynx cable to desired EAC panel control line.
Reference Diagram #1.
• As appropriate, use the configuration card to activate desired mode on reader.
PIN 8 (Yellow – TAMPER)
PIN 6 (Blue – RX COM)
PIN 4 (Green – DATA_0)
PIN 2 (Red – Reader POS)
PIN 1 (Black – Reader NEG)
PIN 3 (White – DATA_1)
PIN 5 (Orange – RX NO)
PIN 7 (Brown - EGND)
Non-UL294 Configuration:
• Connect GREEN_LED input to switch controlled by panel. Shorting GREEN_LED to READER_NEG (Black)
with panel switch will override reader LED to keep it green.
PIN 8 (Yellow – GREEN_LED)
PIN 6 (Blue – RX COM)
PIN 4 (Green – DATA_0)
PIN 2 (Red – Reader POS)
PIN 1 (Black – Reader NEG)
PIN 3 (White – DATA_1)
PIN 5 (Orange – RX NO)
PIN 7 (Brown - EGND)

5) Wiring Diagrams

3-White 4-Green 5-Orange
Communication
Type RX
WIEGAND WIEGAND
DATA_1 DATA_0
NO
OSDP OSDP
RS-485B RS-485A
6-Blue 7-Brown 8-Yellow
RX EGND Function*
TAMPER
COM EGND GREEN LED
n/a
PIN 4 (Tan –DPS COM )
PIN 2 (Gray – Lock POS)
PIN 1 (Violet – Lock NEG)
PIN 3 (Pink – DPS NC)
PIN 4 (Tan –DPS COM )
PIN 2 (Gray – Lock POS)
PIN 1 (Violet – Lock NEG)
PIN 3 (Pink – DPS NC)
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY
6
Access and Egress Hardware Group, Inc. is prohibited.
SN200/210 CLX33600
Cylindrical Lock
4 PIN CONNECTOR
1-Violet 2-Gray 3-Pink
12/24 VDC
DPS
(LOCK RELAY)
NEG POS NC
Note: NC= Normally Closed
NO= Normally Open
4-Tan
DPS
COM