Summary of Contents for Assa Abloy Yale eBoss 8850FL Series
Page 1
Maintains unlocked state. Normal locked state. Any assigned user codes except assigned user code can gain Relocks by entering passage for the Supervisor and access. Lock relocks code the second time. Emergency Codes. automatically. 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
Section V Hardwire Options Diagram A. Hardwire options diagram………………………………………..…..……..12 Section I List of Components I-A Necessary tools #2 Phillips screwdriver #3 Phillips screwdriver 1/8" Allen wrench Small flat blade screw driver Hole saw set 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
7. Mortise jamb for strike (3/32˝ deep). Be sure to mortise 1˝ (25mm) deep to accommodate lock bolts or strike F) Install Strike 1. Attach strike to jamb using two #12 combination attaching screws. (See Fig. 1, page 6). 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
1. Locate RED MARK on locking piece. 2. Push toggle button slide away from "square spindle hole". 3. With blade screw driver push RED MARK on slide nearest "square spindle hole". 4. RED MARK indicates locked side! 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
8. Loosely fasten the controller board to the tee nut using #10-32 X 1 screw thru the " long plastic spacer. 9. Loosely fasten the top of the controller board using #10-32 X 1 screw thru hole “G”. " 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
13. Install the inside lever and securely tighten the set screw. 14. Install harness connectors to the controller board (see Wiring Diagram on page 12). 15. Skip to page 11. 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
6. Loosely fasten the controller board to the tee nut using #10-32 X 1 screw thru the long " plastic spacer. 7. Loosely fasten the #10-32 X 1 screw thru hole “G” and into the keypad post. " 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
11. Install the inside lever and securely tighten the set screw. 12. Install harness connectors to the controller board (See Wiring Diagram on page 12). For deadbolt monitoring connection see picture above. 13. Skip to page 11. 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
Controller Board prior to mating up Re-tighten controller board screws and with Rose Escutcheon. refer to step #2. 80-9086-0050-010 (10-12) An ASSA ABLOY Group brand...
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. Yale® and eBoss® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.