Optional) Replacing A Wet Film Humidifier - Huawei NetCol8000-A013 User Manual

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
Step 5 Remove the power cable terminal on the right of the electric heater from the
electric heater contactor, and pull out the cable from the top.
Step 6 Use a Phillips screwdriver to remove the two screws that secure the support of the
electric heater, and pull out the support, as shown by (2) and (3) in
Figure 5-2 Removing an electric heater
Step 7 Use a Phillips screwdriver to remove the four screws that secure the electric heater
and remove the electric heater, as shown by (2) in
Step 8 Install the new electric heater in the sequence from
Step 9 Power on the equipment, choose Maintain > Performance Maintain on the home
screen, and clear the total runtime of the electric heater.
Step 10 Tap
displayed. Ensure that the smart cooling product is running normally without any
alarms.
----End

5.4.1.3 (Optional) Replacing a Wet Film Humidifier

Prerequisites
●
●
Context
●
Issue 02 (2020-11-09)
on the home screen, and tap Yes on the start confirmation screen
A wet film humidifier needs to be replaced.
A spare wet film humidifier of the same model is available and functional.
Tool: Phillips screwdriver
Copyright © Huawei Technologies Co., Ltd.
5 System Operation and Maintenance
Figure 5-2.
Step 7 to 3.
Figure 5-2.
106