External Oxygen Connection - Weinmann Module System Instructions For Use Manual

4.3 External oxygen connection

16
EN Assembly
2. Screw the pressure reducer with the corrugated
union nut to the cylinder valve. Tighten the
union nut hand-tight.
3. Screw the pressure tube with the G 3/8 union
nut to the pressure reducer outlet.
4. Screw the other end of the pressure tube to
oxygen inlet
In addition to oxygen inlet
oxygen connection
Tapping off oxygen
You may not operate a module at the same time as
tapping off oxygen, otherwise the specified
technical data will not be maintained.
Feeding in oxygen
You can use the external oxygen feed for example to
allow continued working with the modules when
the oxygen cylinder is being changed.
Due to the nonreturn valves in oxygen inlet
oxygen should always be fed in at the module fitted
on the extreme left.
of the module.
1
, you can use external
1
to tap off or feed in oxygen.
8
,
1