Additional Configurations; Set The Real Time Clock; Change The Current User Name, Password; Create A Read Only Password Or User Name - ATTO Technology iPBridge 2600 Installation And Operation Manual

Additional configurations to improve usability and security are available on the iPBridge. Use ATTO
ExpressNAV or the Command Line Interface.

Set the Real Time Clock

Before proceeding you should set the Real Time
Clock. You can set the time automatically by
using the Simple Network Time Protocol (SNTP).
SNTP is enabled by default.
Note
The iPBridge must remain powered on for
more than 24 hours to ensure the date and
time are set.
1 If you are not already in the ExpressNAV GUI,
type the IP address of your iPBridge, as found
in Discover the IP address
standard browser and press Enter.
2 Type in the current user name and password.
3 On the left-hand side menu, click Time & Date.
4 If you are using a time server on your network
to set the time,
a. Click Simple Network Time Protocol
enabled.
b. Type the IP address of the time server
in the Time Server text box.
c. Click Submit.
5 If you are setting the time manually, click
Simple Network Time Protocol disabled.
a. Click Submit.
b. Select a time zone from the Time Zone
drop-down choices.
c. In the box marked HH:MM:SS enter
the desired time in hours, minutes, and
seconds.
d. In the box marked MM:DD:YYYY enter
the desired month, day, and year in
digits.
e. Click Submit.

Change the current user name, password

It is best practice to change the default user name
and password to a user name and password
significant to you.
1 If you are not already in the ExpressNAV GUI,
type the IP address of your iPBridge, as found
13
ATTO Technology Inc. iPBridge Installation and Operation Manual

2.2 Additional configurations

on page 5, in a
in Discover the IP address
standard browser and press Enter.
2 On the left-hand side menu, click Bridge.
The Bridge Configuration page is displayed.
The user name that you are currently logged in
with is displayed in the Username text box.
3 Enter appropriate information into the
Username, Current Password, Old
Password, New Password, and Confirm
Password text boxes.
Note
The user name is case insensitive and
password is case sensitive.
4 Click Submit.
5 The user name and password for all Telnet,
FTP and ATTO ExpressNAV sessions is
changed.

Create a read only password or user name

You may set a read only password or a read only
user name. Refer to General use commands
page 37.
1 If you are not already in the ExpressNAV GUI,
type the IP address of your iPBridge, as found
in Discover the IP address
standard browser and press Enter.
2 On the left-hand side menu, click Bridge.
The Bridge Configuration page is displayed.
The user name that you are currently logged in
with is displayed in the Username text box.
3 Enter the Admin password in the first line of the
boxed area.
4 Enter the desired information into the Admin
Username, New Admin Password, Confirm
New Admin Password or New Read Only
Password and Confirm New Read Only
Password text boxes.
The user name is case insensitive and password
is case sensitive.
5 Click Submit.
The user name or password for all Telnet, FTP
and ATTO ExpressNAV sessions are changed.
on page 5, in a
on
on page 5, in a