ATTO Technology iPBridge 2600 Installation And Operation Manual page 54

7.1.5 Serial port configuration commands
The ATTO iPBridge serial ports or serial headers are configured with default settings but may be
customized to your specifications using the CLI commands in this section.
SerialPortBaudRate
Configures/reports the baud rate for the iPBridge RS-232
serial port or serial header. The number of data bits per
character is fixed at 8 with no parity. Choices are 9600,
19200, 38400, 57600 and 115200.
Default: 115200
set SerialPortBaudRate [9600 |19200 | 38400 | 57600
|115200]
Requires a SaveConfiguration command
get SerialPortBaudRate
45
ATTO Technology Inc. iPBridge Installation and Operation Manual
SerialPortEcho
Enables/disables/reports the echoing of keyboard input.
When enabled, all non-control character keyboard input
is output to the display.Local ASCII terminal (or terminal
emulator) echo settings should be set to disabled while
using SerialPortEcho enabled
Default: enabled
set SerialPortEcho [enabled | disabled]
Requires a SaveConfiguration Restart command
get SerialPortEcho