Do you have a question about the ATTO ExpressPCI Ultra/WIDE SCSI Host Adapters Express PCI PSC: Single-Channel Single-Ended Ultra/WIDE ExpressPCI DC: Dual-Channe and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Related Manuals for ATTO Technology ATTO ExpressPCI Ultra/WIDE SCSI Host Adapters Express PCI PSC: Single-Channel Single-Ended Ultra/WIDE ExpressPCI DC: Dual-Channe
Analyze your I/Os 5 Troubleshooting ... 17 Appendix A Standards and compliances ... i Appendix B SCSI host adapter selection guide ... ii Appendix C Fibre Channel host adapter guide ... iii Appendix D Contact ATTO Technology, Inc..iv Contents...
3 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual The SCSI architecture is structured as a hierarchical set of protocol layers. Defined within...
Page 7
Term Definition SCSI Small Computer Systems Interface: a processor-independent standard for system-level interface between a computer and intelligent devices including hard disks, floppy disks, CD-ROM, printers, scanners, etc. topology logical layout of the parts of a computer system or network and their interconnections transceiver a transmitter/receiver module...
ATTO ExpressPCI host adapter in any open PCI expansion slot. If you have 5 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual questions about how to install an expansion card in your system, consult your computer’s documentation.
Page 9
The ATTO ExpressPCI PSC SCSI adapter 68-pin External 16-bit High Density Cable Connector The ATTO ExpressPCI DC SCSI adapter Channel 2: 68-pin VHDCI Connector Channel 1: 68-pin VHDCI Connector 50-pin Internal 8-bit “A” Cable Connector 68-pin Internal 16-bit “P” Cable Connector Dedicated 3rd Generation RISC Based UltraSCSI PCI 2.1 Compliant...
68- ATTO ExpressPCI DC: pin “P” (16-bit) cable connectors for internal 7 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual environment to 3 meters (combined length of both internal and external cable lengths). In an UltraSCSI workgroup environment with a 7- drive tower, you are limited to 1.5 meters between...
Connection considerations If using a combination of Wide 16-bit devices and Narrow 8-bit devices on the same connector, Wide devices must be connected first (closest to Exhibit 3.1-2 Several types of internal and external cable connectors. Termination The SCSI bus is a chain of SCSI devices. The devices at both ends of any SCSI chain must be terminated for the SCSI bus to function correctly.
Page 12
This can be done in several ways. Many Single-Ended Ultra SCSI and earlier 9 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual devices provide a jumper setting for applying termination: place a jumper over the pins designated for termination on the last device on the internal cable.
Page 13
host adapters supply Termination power: termination power to the bus at all times and many SCSI devices are also able to supply termination power. SCSI signal quality, particularly with long or marginal quality cables, may be improved if the device supplies the termination power. Contact your device manufacturer for more information on your device’s ability to supply termination power.
10 When adapter installation is complete, the Found New Hardware Wizard will appear showing an ATTO Phantom Device for each 11 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual channel. Proceed through the wizard with the default settings to complete the installation.
After all other drivers have been processed, press Enter and proceed with the rest of the Windows Installation procedure. NOTE When Windows begins copying files to your hard disk, you will again be prompted to insert the ExpressPCI Windows NT Installation To install/upgrade the Windows NT driver Log on to Windows as the system administrator.
ExpressPCI host adapters. A complete download package, including all necessary installation instructions, is available on 13 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual Press Enter Windows should load the driver, detect the presence of the ExpressPCI adapter, then return to the screen of step 3.
Updating Drivers and Re-flashing Firmware in Mac OS X Mac OS X drivers, including installer packages, can be downloaded directly from the ATTO web site, www.attotech.com. The driver installers will automatically unionist existing drivers and properly install the new drivers on your system. After installing, the new adapter driver you will need to update the firmware.
If the system has a built in Symbios or LSI adapter, do not disable the driver for that adapter. 15 ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual Set registry for large block transfers If your application requires large block transfers, set the registry entry correctly for the MaximumSGList keyword.
available in the file Stripe.txt on the CD which has been included with your ATTO ExpressPCI adapters. Increase transfer size If you are writing to an application that uses a lot of sequential disk I/O to a contiguous area on disk, you should use as large a transfer size as possible to reduce overhead on the system, on the SCSI bus and within disk drives.
This chapter contains solutions for the most common problems you might encounter. If you need additional assistance, please refer to the ATTO Technology web site (www.attotech.com) or contact an ATTO Technology authorized representative. Check each cable connection on every device.
CAUTION Failure to adhere to the above restrictions could result in a modification that is considered an act of “manufacturing” and will require, under law, recertification of the modified product with the U.S. Food and Drug Administration (ref. 21 CFR 1040.10(i)). i ATTO Technology ExpressPCI Ultra/WIDE SCSI Host Adapters Installation and Operation Manual...
Appendix B SCSI host adapter selection guide ATTO Technology offers a number of SCSI and Fibre Channel solutions for storage. The following chart compares the features of ExpressPCI SCSI host adapters. Supported platforms: Sun Solaris; Linux; NetWare; SCO Unix; Windows 2000, 95/98, NT, and Macintosh OS and OS X.
Appendix C Fibre Channel host adapter guide ATTO Technology offers a number of SCSI and Fibre Channel solutions for storage. The following chart compares the features of ExpressPCI Fibre Channel host adapters. Supported platforms: Sun Solaris; Linux; NetWare; SCO Unix; Windows 2000, 95/98, NT, and Macintosh OS and OS X.
Eastern Standard Time 8:00 a.m. to 8:00 p.m., or by e-mail and web site 24-hours a day. ATTO Technology, Inc. 155 CrossPoint Parkway Amherst, New York 14068 (716) 691-1999 • voice (716) 691-9353 • fax http://www.attotech.com ATTO Technology can also be reached via e-mail at the following addresses: Sales Support: Technical Support: sls@attotech.com techsupp@attotech.com...
Need help?
Do you have a question about the ATTO ExpressPCI Ultra/WIDE SCSI Host Adapters Express PCI PSC: Single-Channel Single-Ended Ultra/WIDE ExpressPCI DC: Dual-Channe and is the answer not in the manual?
Questions and answers