Install Ms Iscsi Initiator For Windows; Install Iscsi Initiator For Mac Os X - ATTO Technology 1500D Installation And Operation Manual

• If you wish to view information about the unit or
make any changes, use the ExpressNAV
interface by clicking Launch Browser. Refer to
ExpressNAV provides web-based interface
page 29 and ExpressNAV pages

Install MS iSCSI Initiator for Windows

1 Download the latest version of Microsoft
Software Initiator from
www.microsoft.com/downloads.
on iSCSI Initiator usually helps to locate it.
2 Launch the Initiator installation program and
follow the instructions.
3 Find the Microsoft iSCSI Initiator icon on your
desktop and launch the program.
4 Click on the Discovery tab.
5 Click on the Add button under the target portal
heading.
6 Type in the iPBridge 1500/1550 IP address
previously-recorded in
on page 11.
on
on page 31.
®
iSCSI
Searching
Discover the IP address
7 Click on OK
8 Click the Targets tab.
9 Click on Log on button.
10 Select Automatically restore
11 Click OK to complete logon.
12 If the Found New Hardware Wizard appears,
follow the instructions and install the iPBridge
driver from the CD that came with your
iPBridge.
13 Click OK to close the iSCSI Initiator utility.
You should now have storage you can manage
through Windows Disk Management.

Install iSCSI Initiator for Mac OS X

Contact your ATTO sales representative or go to
to purchase the ATTO
www.attotech.com
Technology Xtend SAN, iSCSI Initiator for Mac
OS X.
12
Installation