ATTO Technology 1500D Installation And Operation Manual page 5

2.1 Target management .............................................................13
2.2 System setup options ..........................................................19
3 Remote system monitoring ...............................................................21
4 Updating firmware .............................................................................22
5 Troubleshooting .................................................................................23
Target names
Default target node
Map devices automatically
Map devices manually
Multiple target nodes
Automatically configure multiple targets
Manually configure multiple target nodes
Change mapping
Change the current user name, password
Create a read only password or user name
Performance optimization
Set up a VLAN: Virtual Local Area Network
Preliminary steps
Using ATTO ExpressNAV
Using FTP over GbE
Inside out method
Check the host event log
Check the iPBridge event and trace logs
Visually inspect LEDs
Check for problems on attached devices
Check host versions
Check iPBridge product versions
Component check
Checking SCSI devices
Checking the iPBridge SCSI ports
Checking the serial port
Checking the iPBridge internal configuration
Checking iPBridge Ethernet ports
Checking the LAN/WAN
Checking the iSCSI Host Adapter or NIC
Checking the iSCSI OS driver
Checking the Operating System
Checking the applications
Performance issues
Checking SCSI devices
Checking iPBridge SCSI ports
Checking iPBridge Ethernet ports
Checking the LAN/WAN
Checking Ethernet Host Adapter or NIC
Checking the applications
Checking the host system
Checking the Operating System
Reset to factory defaults