ATTO Technology 1500D Installation And Operation Manual page 63

RouteDisplay
Displays a combined list of the host protocol address to
target destination device mappings.
RouteDisplay iSCSI [default <lun> | Target Name <lun>]
SCSIInitID
Specifies the persistent SCSI initiator ID to be used on the
specified SCSI port. All maps coinciding with the user-
specified SCSIInitID are destroyed upon issuing this
command. Choices are 0 to 15.
Default: 7
set SCSIInitID [sb [0-15] ]
Requires a SaveConfiguration command
get SCSIInitID
SCSITargets
Lists the SCSI devices operational on the SCSI port.
SCSITargets [sb]
VLAN
Creates up to eight Virtual LAN IDs for each Ethernet
data port. Each VLAN ID is assigned a VLAN name of up
to 64 characters. If no VLALN ID exists for a data port,
VLAN is disabled for that port.Refer to
optimization on page 19.
set VLAN [dp [n]] [[VLAN ID] [VLAN Name] <delete>| [all]
[delete]]
Requires a SaveConfiguration command
get VLAN [dp [n]]
Performance
54
CLI commands