Scsiporttaggedqueuing; Scsiportultra2; Scsiportwidetransfer; Scsitargets - ATTO Technology FibreBridge 1190E Installation And Operation Manual

ScsiPortTaggedQueuing

Specifies whether tagged command queuing is allowed on the SCSI port.
Limits: [enabled | disabled]
Action: set ScsiTaggedQueuing [sb [enabled|disabled]] Information: get ScsiTaggedQueuing [sb]
SaveConfiguration

ScsiPortUltra2

Specifies whether the selected port supports Ultra2 (LVD) transfers
Limits: effective only if specified port is LVD SCSI bus
Action: set ScsiPortUltra2 [sb [enabled|disabled ] ]
SaveConfiguration

ScsiPortWideTransfer

Specifies whether wide SCSI transfers should be negotiated.
Action: set ScsiPortWideTransfer [sb[enabled|disabled]] Information: get ScsiPortWideTransfer [sb]
SaveConfiguration

ScsiTargets

Returns a list of SCSI devices operational on the referenced SCSI port.
Action: none
ScsiTermination
Configures/reports the SCSI internal termination of the SCSI port identified.
Action: set ScsiTermination [sb [enabled | disabled ] ]
SaveConfiguration
Default: enabled
Information: get ScsiPortUltra2 [sb ]
Default: enabled
Information: ScsiTargets [sb]
Returns: [line count]
[sb] [st] [sl] [device type] [vendor ID] [product ID] [revision] [serial
number]
Default: enabled
Information: get ScsiTermination [sb]
22