Table of Contents
Advertisement
To enable serverless backup on the
FibreBridge:
1
Access the FibreBridge either through RS-
232 or Ethernet.
2
After the Ready prompt, type set Fcinitiator
enabled.
Server
Serverless Backup Agent
Serverless backup in a SAN
Exhibit 8-1 Once the server sends a command to the FibreBridge for extended copy, the FibreBridge manages
the backup procedure, by-passing the server.
Host
Serverless Backup Application
Fibre Channel SAN
3
At the next Ready prompt, type
saveconfiguration restart.
4
The FibreBridge is now ready to perform
serverless backup.
SCSI tape backup device
Disk Array
Server storage
Data path
ATTO FibreBridge
Data Mover
Data path
SCSI tape
32
Advertisement
Table of Contents
