Emerson PACSystems SLM080 User Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Switch
  5. PACSystems SLM080
  6. User manual
Emerson PACSystems SLM080 User Manual

Emerson PACSystems SLM080 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
GFK-3125A
Jan 2020
PACSystems™ Ethernet Switch
SLM080 User Manual

Advertisement

Table of Contents
loading

Related Manuals for Emerson PACSystems SLM080

Summary of Contents for Emerson PACSystems SLM080

  • Page 1 User Manual GFK-3125A Jan 2020 PACSystems™ Ethernet Switch SLM080 User Manual...
  • Page 2 It is understood that Emerson may make changes, modifications, or improvements to the equipment referenced herein or to the document itself at any time. This document is intended for trained personnel familiar with the Emerson products referenced herein.

  • Page 3: Table Of Contents

    PACSystems™ Ethernet Switch SLM080 User Manual Contents GFK-3125A Jan 2020 Contents Section 1: Getting to Know Your Switch ......... 1 About the SLM080 Managed Industrial Switch ............. 1 Software Features ....................1 Section 2: Hardware Features ..........2 Hardware Installation ..................2 2.1.1 Installing Switch on DIN-Rail ..............
  • Page 4 PACSystems™ Ethernet Switch SLM080 User Manual Contents GFK-3125A Jan 2020 5.1.6 DHCP Server .................... 30 5.1.6.1 DHCP Server – Setting ..............30 5.1.6.2 DHCP Server – Client List ..............31 5.1.6.3 DHCP Server – Port and IP bindings ..........32 5.1.6.4 Port Setting ..................
  • Page 5 PACSystems™ Ethernet Switch SLM080 User Manual Contents GFK-3125A Jan 2020 5.2.9.2 Port Statistics .................. 65 5.2.9.3 System Event Log ................65 5.2.9.4 Port Monitoring ................66 5.2.9.5 Save Configuration ................67 5.2.9.6 Factory Default ................68 5.2.9.7 System Reboot ................68 Section 6: Command Line Interface Management ....

  • Page 6: Getting To Know Your Switch

    PACSystems Ethernet Switch SLM042 User Manual Section 1 GFK-3125A Jan 2020 Section 1: Getting to Know Your Switch About the SLM080 Managed Industrial Switch The SLM080 is powerful managed industrial switch with many features. This switch can work under wide temperature, dusty environment and humid condition. The SLM080 can be managed by WEB, Console or other third-party SNMP software as well.

  • Page 7: Hardware Features

    PACSystems Ethernet Switch SLM080 User Manual Section 2 GFK-3125A Jan 2020 Section 2: Hardware Features • Redundant three DC power inputs • Wide Operating Temperature: -40 to 70 • Storage Temperature: -40 to 85 • Operating Humidity: 5% to 95%, non-condensing •...

  • Page 8: Mount Switch On Din-Rail

    PACSystems Ethernet Switch SLM080 User Manual Section 2 GFK-3125A Jan 2020 2.1.2 Mount Switch on DIN-Rail Figure 1: DIN Rail Size 2.1.3 Wall Mounting Installation Each switch has another installation method for users to fix the switch. A wall mount panel can be found in the package.

  • Page 9: Hardware Overview

    PACSystems Ethernet Switch SLM080 User Manual Section 3 GFK-3125A Jan 2020 Section 3: Hardware Overview Front Panel The following table describes the labels that stick on the Switch Port Description 10/100Base-T(X) RJ-45 fast Ethernet ports support auto- negotiation. Default Setting : Speed: auto Duplex: auto Flow control : disable 10/100 RJ-45 fast Ethernet ports Console...

  • Page 10: Front Panel Leds

    PACSystems Ethernet Switch SLM080 User Manual Section 3 GFK-3125A Jan 2020 4. LED for R.M (Ring master). When the LED light on, it means that the switch is the ring master of Redundant Ring. 5. LED for Ring. When the led light on, it means the Redundant Ring is activated. 6.

  • Page 11: Top View Panel

    PACSystems Ethernet Switch SLM080 User Manual Section 3 GFK-3125A Jan 2020 Top view Panel The bottom panel components of SLM080are shown as below: 1. Terminal block includes: PWR1, PWR2 (12-48V DC) and Relay output (1A@24VDC). 2. Power jack for PWR3 (12-45VDC). 3.

  • Page 12: Cables

    PACSystems Ethernet Switch SLM080 User Manual Section 3 GFK-3125A Jan 2020 Section 4: Cables Ethernet Cables The SLM080 switches have standard Ethernet ports. According to the link type, the switches use CAT 3, 4, 5,5e UTP cables to connect to any other network device (PCs, servers, switches, routers, or hubs). Please refer to the following table for cable specifications.

  • Page 13: Console Cable

    PACSystems Ethernet Switch SLM080 User Manual Section 3 GFK-3125A Jan 2020 10/100 Base-TX MDI/MDI-X pins assignment Pin Number MDI port MDI-X port TD+(transmit) RD+(receive) TD-(transmit) RD-(receive) RD+(receive) TD+(transmit) Not used Not used Not used Not used RD-(receive) TD-(transmit) Not used Not used Not used Not used...

  • Page 14: Web Management

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Section 5: Web Management WARNING While making any establishment and upgrade firmware, please remove physical loop connection first. Do NOT power off equipment while firmware is upgrading. Configuration by Web Browser This section introduces the configuration by Web browser.
  • Page 15 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 System Login 1. Launch the Internet Explorer. 2. Type http:// or https:// and the IP address of the switch. Press “Enter”. Figure 6: URL 3. The login screen appears. 4.

  • Page 16: System Information

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Main Interface Figure 8: Main Interface 5.1.2 System Information Figure 9: System Information System Information System Information interface The system information will display the configuration of Basic Setting / Switch Setting page. Web Management...

  • Page 17: Basic Setting

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Enable Location Alert When enabling, click Enable Location Alert, Pwr1, Pwr2, and Pwr3 LEDs of the switch will start to flash together, and click Disable Location Alert, the LEDs will stop flashing. Front Panel Show the panel of Switch.

  • Page 18: Admin Password

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Admin Password Change web management login username and password for the management security issue Figure 11: Admin Password The following table describes the labels in this screen. Label Description Enter the current system User Name.

  • Page 19: Ip Setting

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 IP Setting You can configure the IP Settings and DHCP client function through IP configuration. Figure 12: IP Setting The following table describes the labels in this screen. Label Description To enable or disable the DHCP client function.

  • Page 20: Sntp

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Label Description Subnet Mask is enabling, you do not need to assign the subnet mask Assign the network gateway for the switch. The default gateway is 192.168.0.254 Gateway DNS1 Assign the primary DNS IP address DNS2 Assign the secondary DNS IP address...
  • Page 21 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description SNTP Client Enable or disable SNTP function to get the time from the SNTP server. Set the switch location time zone. The following table lists the different location time zone for your reference.
  • Page 22 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Local Time Zone Conversion from UTC Time at 12:00 UTC November Time Zone - 1 hour 11 am Oscar Time Zone -2 hours 10 am ADT - Atlantic Daylight -3 hours 9 am AST - Atlantic Standard...
  • Page 23 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 ZP4 - USSR Zone 3 +4 hours 4 pm ZP5 - USSR Zone 4 +5 hours 5 pm ZP6 - USSR Zone 5 +6 hours 6 pm WAST - West Australian +7 hours 7 pm Standard...

  • Page 24: Lldp

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.1.3.3 LLDP LLDP (Link Layer Discovery Protocol) function allows the switch to advertise its information to other nodes on the network and store the information it discovers. Figure 14: LLDP The following table describes the labels in this screen.

  • Page 25: Backup & Restore

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description TFTP Server IP Address Fill in the TFTP server IP Configuration File Name Fill the configuration file name. Firmware File Name Fill the Firmware file name.

  • Page 26: Upgrade Firmware

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.1.3.6 Upgrade Firmware Upgrade Firmware allows you to update the switch firmware. Before updating, make sure you have your TFTP server ready and the firmware image is on the TFTP server. Figure 17: Upgrade Firmware 5.1.4 DHCP Server...

  • Page 27: Dhcp Server - Client List

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Label Description Enable or Disable the DHCP Server function. Enable – the switch will be the DHCP server on your local network DHCP Server The dynamic IP assign range. Low IP address is the beginning of the dynamic IP assigns range.

  • Page 28: Dhcp Server - Port And Ip Bindings

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.1.4.3 DHCP Server – Port and IP bindings You can assign the specific IP address which is in the assigned dynamic IP range to the specific port . When the device is connecting to the port and asks for dynamic IP assigning, the system will assign the IP address that has been assigned before in the connected device.

  • Page 29: Port Setting

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.1.4.4 Port Setting Port Control 5.1.4.4.1 By this function, you can set the state, speed/duplex, flow control, and security of the port . Figure 20: Port Control The following table describes the labels in this screen. Label Description Port NO.

  • Page 30: Port Status

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.1.4.5 Port Status The following information provides the current port status information Figure 21: Port Status 5.1.4.6 Rate Limit By this function, you can limit traffic of all ports, including broadcast , multicast and flooded unicast . You can also set “...

  • Page 31: 5.1.6.4 Port Trunk

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description You can set “ all ” , “ Broadcast only ” , ” Broadcast/Multicast ” or Ingress Limit Frame Type ”...
  • Page 32 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description Group ID Select port to join a trunk group. Type Support static trunk and 802.3ad LACP Select the number of active ports in dynamic group (L ACP). The default value of works ports is maximum number of the group.

  • Page 33: Redundancy

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.1.5 Redundancy 5.1.5.1 Redundant Ring Redundant Ring is the most powerful Ring in the world. The recovery time of Ring is less than 10ms. It can reduce unexpected damage caused by network topology change. Redundant Ring Supports 3 Ring topology: Ring, Coupling Ring and Dual Homing.
  • Page 34 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description Redundant Ring Mark to enable Ring. Ring Master There should be one and only one Ring Master in a ring. However if there are two or more switches which set Ring Master to enable, the switch with the lowest MAC address will be the actual Ring Master and others will be Backup Masters.

  • Page 35: Rstp

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 RSTP The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol. It provides faster spanning tree convergence after a topology change. The system also supports STP and the system will auto detect the connected device that is running STP or RSTP protocol.
  • Page 36 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Show RSTP algorithm result at this table Figure 27: Port Setting Label Description Path Cost (1-200000000) The cost of the path to the other bridge from this transmitting bridge at the specified port . Enter a number 1 through 200000000.

  • Page 37: Vlan

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.2 VLAN A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, which allows you to isolate network traffic. Only the members of the VLAN will receive traffic from the same members of VLAN.

  • Page 38: Vlan Setting - Port Based

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description VLAN Operation Mode Configure VLAN Operation Mode: disable, Port Base,802.1Q GVRP Mode Enable/Disable GVRP function. Management VLAN ID Management VLAN can provide network administrator a secure VLAN to management Switch.
  • Page 39 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description Click “ add ” to enter VLAN add interface. Edit Edit exist VLAN Delete Delete exist VLAN Help Show help file.

  • Page 40: Snmp

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.4 SNMP Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables network administrators to manage network performance, find and solve network problems, and plan for network growth.

  • Page 41: Snmp -Trap Setting

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.4.2 SNMP –Trap Setting A trap manager is a management station that receives traps, the system alerts generated by the switch. If no trap manager is defined, no traps will issue. Create a trap manager by entering the IP address of the station and a community string.

  • Page 42: Snmpv3

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 SNMPV3 5.2.5 Figure 33: SNMPV3 The following table describes the labels in this screen Label Description Context Table Configure SNMP v3 context table. Assign the context name of context table. Click "Apply" to change context name User Table 1.
  • Page 43 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 Group Table 1. Configure SNMP v3 group table. 2. Security Name (User ID): assign the user name that you have set up in user table. 3. Group Name: set up the group name. 4.

  • Page 44: Traffic Prioritization

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.6 Traffic Prioritization Traffic Prioritization includes 3 modes: port base, 802.1p/COS, and TOS/DSCP. By traffic prioritization function, you can classify the traffic into four classes for differential network application. 5.2.6.1 Qos policy Figure 34: Policy...

  • Page 45: Port-Base Priority

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.6.2 Port-Base Priority Figure 35:Port-Base Priority The following table describes the labels in this screen Label Description Port base Priority Assign Port with a priority queue. 4 priority queues can be assigned: High, Middle, Low, and Lowest .

  • Page 46: Cos/802.1P

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.6.3 COS/802.1p Figure 36: COS/802.1p The following table describes the labels in this screen Label Description COS/802.1p COS (Class Of Service) is well known as 802.1p. It describes that the output priority of a packet is determined by user priority field in 802.1Q VLAN tag.

  • Page 47: Tos/Dscp

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.6.4 TOS/DSCP Figure 37: TOS/DSCP The following table describes the labels in this screen Label Description TOS/DSCP TOS (Type of Service) is a field in IP header of a packet . This TOS field is also used by Differentiated Services and is called the Differentiated Services Code Point (DSCP).

  • Page 48: Multicast

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.7 Multicast 5.2.7.1 IGMP Snooping Internet Group Management Protocol (IGMP) is used by IP hosts to register their dynamic multicast group membership. IGMP has 3 versions, IGMP v1, v2 and v3. Please refer to RFC 1112, 2236 and 3376.

  • Page 49: Static Multicast Filtering

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.7.2 Static Multicast Filtering Static Multicast filtering is the system by which end stations only receive multicast traffic if they register to join specific multicast groups. With multicast filtering, network devices only forward multicast traffic to the ports that are connected to registered end stations.

  • Page 50: Security

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.8 Security Five useful functions can enhance security of switch: IP Security, Port Security, MAC Blacklist , and MAC address Aging and 802.1x protocol. 5.2.8.1 IP Security Only IP in the Secure IP List can manage the switch through your defined management mode. ( WEB, SNMP) Figure 40: IP Security The following table describes the labels in this screen.

  • Page 51: Port Security

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.8.2 Port Security Static MAC Forwarding is to add static MAC addresses to hardware forwarding database. If port security is enabled at Port Control page, only the frames with MAC addresses in this list will be forwarded, otherwise will be discarded.

  • Page 52: Mac Blacklist

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.8.3 MAC Blacklist MAC Blacklist can eliminate the traffic forwarding to specific MAC addresses in list . Any frames forwarding to MAC addresses in this list will be discarded. Thus the target device will never receive any frame. Figure 42: MAC Blacklist The following table describes the labels in this screen.

  • Page 53: 802.1X

    PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 5.2.8.4 802.1x 802.1x - Radius Server 802.1x makes the use of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a authenticated and authorized devices attached to a LAN port . Please refer to IEEE 802.1X - Port Based Network Access Control.
  • Page 54 PACSystems Ethernet Switch SLM080 User Manual Section 5 GFK-3125A Jan 2020 The following table describes the labels in this screen. Label Description 802.1x Portocol Enable or Disable 802.1X Radius Server function . Radius Server IP The IP address of the authentication server. Server port Set the UDP port number used by the authentication server to authenticate.
  • Page 55 PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 802.1x-Port Authorized Mode Set the 802.1x authorized mode of each port . Figure 44: Port Authorized Mode The following table describes the labels in this screen. Label Description Port Authorized Mode ...

  • Page 56: Warning

    PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 802.1x-Port Authorized Mode Show 802.1x port authorized state Figure 45: 802.1x Port Authorized Mode 5.2.8.5 Warning Warning function is very important for managing switch. You can manage switch by SYSLOG, E-MAIL, and Fault Relay.
  • Page 57 PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 System Warning – SYSLOG Setting The SYSLOG is a protocol to transmit event notification messages across networks. Please refer to RFC 3164 - The BSD SYSLOG Protocol Figure 47: System Warning - Syslog Setting The following table describes the labels in this screen.
  • Page 58 PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 Figure 48: System Warning - SMTP Setting Label Description E-mail Alert Enable/Disable transmission system warning events by e-mail. SMTP Server IP Address Setting up the mail server IP address Mail Subject The Subject of the mail Sender...
  • Page 59 PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 System Warning – Event Selection SYSLOG and SMTP are the two warning methods that supported by the system. Check the corresponding box to enable system event warning method you wish to choose. Please note that the checkbox can not be checked when SYSLOG or SMTP is disabled.

  • Page 60: Monitor And Diagnostics

    PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 5.2.9 Monitor and Diagnostics 5.2.9.1 MAC Address Table The MAC Address Table, that is Filtering Database, supports queries by the Forwarding Process, as to whether a frame received by a given port with a given destination MAC address is to be forwarded through a given potential transmission port .

  • Page 61: Port Statistics

    PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 5.2.9.2 Port Statistics Figure 51: Port Statistics 5.2.9.3 System Event Log If system log client is enabled, the system event logs will be shown in this table. Figure 52: System Event Log The following table describes the labels in this screen.

  • Page 62: Port Monitoring

    PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 5.2.9.4 Port Monitoring Port monitoring function supports TX (egress) only, RX (ingress) only, and both TX/RX monitoring. TX monitoring sends any data that egress out checked TX source ports to a selected TX destination port as well.

  • Page 63: Save Configuration

    PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 5.2.9.5 Save Configuration If any configuration changed, “ Save Configuration ” should be clicked to save current configuration data to the permanent flash memory. Otherwise, the current configuration will be lost when power off or system reset.

  • Page 64: Factory Default

    PACSystems Ethernet Switch SLM042 User Manual Section 5 GFK-3125A Jan 2020 5.2.9.6 Factory Default Figure 55: Factory Default Reset switch to default configuration. Click to reset all configurations to the default value. You can select “Keep current IP address setting” and “Keep current username & password” to keep current IP and username and password.

  • Page 65: Command Line Interface Management

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Section 6: Command Line Interface Management About CLI Management Besides WEB-base management , SLM080 also supports CLI management . You can use console to management switch by CLI. CLI Management by RS-232 Serial Console (9600, 8, none, 1, none) Before Configuring by RS-232 serial console, use an RJ45 to DB9-F cable to connect the Switches ’...
  • Page 66 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Select to use COM port number Figure 58: COM Port Number The COM port properties setting, 9600 for Bits per second, 8 for Data bits, None for Parity, 1 for Stop bits and none for Flow control.
  • Page 67 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 The Console login screen will appear. Use the keyboard to enter the Username and Password (The same with the password for Web Browser), then press Enter . Figure 60: SLM080 Commands Level Modes Access Method...
  • Page 68 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Modes Access Method Prompt Exit Method About This Model or end VLAN Enter the vlan switch(vlan)# To exit to user Use this mode to configure database EXEC mode, database command while enter exit.

  • Page 69: Commands Set List-System Commands Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List―System Commands Set SLM080Commands Level Description Example show config Show switch configuration switch>show config show terminal Show console information switch#show terminal Save your configuration into permanent memory (flash rom) write memory switch#write memory system name...
  • Page 70 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080Commands Level Description Example default Restore to default Switch(config)#default admin username Changes a login username. switch(config)#admin (maximum 10 words) username xxxxxx [Username] admin password Specifies a password switch(config)#admin password xxxxxx [Password] (maximum 10 words) show admin...
  • Page 71 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080Commands Level Description Example show dhcpserver switch#show dhcpser ver configuration configuration Show configuration of DHCP server show dhcpserver clients Show client entries of DHCP server switch#show dhcpserver clinets show dhcpserver ip- Show IP-Binding information of switch#show dhcpserver ip- binding...

  • Page 72: Commands Set List-Port Commands Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List―Port Commands Set SLM080 Commands Level Description Example interface fastEthernet switch(config)#interface fastEthernet 2 Choose the port for modification. [Portid] Use the duplex configuration command to specify the duplex switch(config)#interface mode of operation for Fast Ethernet duplex...
  • Page 73 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080 Commands Level Description Example fastEthernet 2 Set interface ingress limit frame type to “ accept all frame ” switch(config-if)#bandwidth bandwidth type all type all switch(config)#interface fastEthernet 2 Set interface ingress limit frame bandwidth type type to “...
  • Page 74 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080 Commands Level Description Example disable the port . state [Enable | Disable] switch(config)#interface fastEthernet 2 switch(config- if)#show interface show interface show interface configuration status configuration configuration switch(config)#interface fastEthernet 2 switch(config- if)#show interface status show interface status show interface actual status...

  • Page 75: Commands Set List-Trunk Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List―Trunk Command Set SLM080 Commands Level Description Example aggregator priority switch(config)#aggregator priority 22 Set port group system priority [1to65535] aggregator activityport switch(config)#aggregator activityport 2 Set activity port [Port Numbers] Assign a trunk group with LACP active.

  • Page 76: Commands Set List-Vlan Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List―VLAN command set SLM080 Commands Level Description Example vlan database Enter VLAN configure mode switch#vlan database switch(vlan)# vlanmode 802.1q or vlan switch(vlan)# vlanmode gvrp To set switch VLAN mode. [8021q | gvrp] no vlan Disable vlan group(by VID)
  • Page 77 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 switch(vlan)#vlan 8021q aggreator 3 trunk-link tag vlan 8021q aggreator 2,3,6,9 [TrunkID] 9 or Assign a trunk link for VLAN by trunk-link tag trunk group switch(vlan)#vlan 8021q [TaggedVID List] aggreator 3 trunk-link tag 3- vlan 8021q switch(vlan)# vlan 8021q aggr aggreator...

  • Page 78: Commands Set List-Spanning Tree Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List―Spanning Tree command set SLM080 Commands Level Description Example spanning-tree enable switch(config)#spanning- tree enable Enable spanning tree spanning-tree priority Configure spanning tree priority switch(config)#spanning- [0to61440] parameter tree priority 32767 Use the spanning-tree max-age global configuration command to change the interval between...
  • Page 79 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Use the spanning-tree cost interface configuration command to set the path cost for Spanning Tree Protocol (STP) calculations. In switch(config)#interface the event of a loop, spanning fastEthernet 2 tree considers the path cost stp-path-cost switch(config-if)#stp-path- when selecting...

  • Page 80: Commands Set List - Qos Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List ― QoS command set SLM080 Commands Level Description Example qos policy switch(config)#qos policy weighted-fair Select QOS policy scheduling [weighted-fair|strict] qos prioritytype [port- based|cos- only|tos- only|cos- first|tos- switch(config)#qos first] prioritytype...

  • Page 81: Commands Set List - Igmp Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 Commands Set List ― IGMP command set SLM080 Commands Level Description Example igmp enable Enable IGMP snooping function switch(config)#igmp enable Igmp-query auto Set IGMP query to auto mode switch(config)#Igmp-query auto Igmp-query force Set IGMP query to force mode...
  • Page 82 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 switch(config)#interface fastEthernet 2 switch(config-if)#no mac- no mac-address- Remove an entry of MAC table static hwaddr address table of interface address-table static hwaddr [MAC] (static) 000012345678 no mac-address- switch(config)#no mac- table filter hwaddr address-table filter hwaddr Remove an entry of MAC...

  • Page 83: Commands Set List-Snmp Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 6.10 Commands Set List―SNMP Command Set SLM080 Commands Level Description Example snmp agent-mode Select the agent mode of switch(config)#snmp agent- mode v1v2c [v1v2c | v3] SNMP switch(config)#snmp-server host 192.168.10.50 community public snmp-server host [IP trap-version v1 address] community...
  • Page 84 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080 Commands Level Description Example no snmp snmpv3- user [User Remove specified user of switch(config)# no snmp snmpv3- Name] SNMP v3 agent . Privacy user test01 password AuthPW password could be empty. PrivPW password [Authentication...

  • Page 85: Commands Set List - Port Mirroring Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 6.11 Commands Set List ― Port Mirroring command set SLM080 Commands Level Description Example Set RX destination port of monitor function monitor rx switch(config)#monitor rx Set TX destination port of monitor function monitor tx switch(config)#monitor tx...

  • Page 86: Commands Set List-802.1X Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 6.12 Commands Set List―802.1x command set SLM080 Commands Level Description Example Use the 802.1x global configuration command to enable 802.1x protocols. 8021x enable switch(config)# 8021x enable Use the 802.1x system radious IP global 8021x system configuration command to...
  • Page 87 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080 Commands Level Description Example Use the 802.1x misc TX period global configuration command to set the TX 8021x misc txperiod switch(config)# 8021x misc period. txperiod 5 [sec.] Use the 802.1x misc supp timeout global configuration command to set the 8021x misc...

  • Page 88: Commands Set List - Tftp Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 6.13 Commands Set List ― TFTP command set Example SLM080 Commands Level Description Save configuration to TFTP and need to specify the IP of TFTP server and the file name backup switch(config)#backup of image.

  • Page 89: Commands Set List-Syslog, Smtp, Event Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 6.14 Commands Set List―SYSLOG, SMTP, EVENT command SLM080Commands Level Description Example systemlog ip Set System log server IP switch(config)# systemlog ip [IP address] address. 192.168.1.100 systemlog mode switch(config)# systemlog mode both Specified the log mode [client|server|both]...
  • Page 90 PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 SLM080Commands Level Description Example event Redundant Set s ring topology changed switch(config)#event ring- Ring- topology- event type topology-change both change [Systemlog|SMTP|Bo switch(config)#interface event systemlog fastethernet 3 Set port event for system log [Link-UP|Link- switch(config-if)#event Down|Both]...

  • Page 91: Commands Set List-Sntp Command Set

    PACSystems Ethernet Switch SLM080 User Manual Section 6 GFK-3125A Jan 2020 6.15 Commands Set List―SNTP command set SLM080 Commands Level Description Example sntp enable Enable SNTP function switch(config)#sntp enable Enable daylight saving time, if SNTP function is inactive, this command can ’ t be applied. sntp daylight switch(config)#sntp daylight Set period of daylight saving...
  • Page 92 PACSystems Ethernet Switch SLM080 User Manual Section 7 GFK-3125A Jan 2020 Section 7: Command Set List―Redundant Ring command set SLM080 Commands Level Description Example Ring enable Enable Redundant Ring switch(config)# ring enable Ring master Enable ring master switch(config)# ring master Ring couplering Enable couple ring switch(config)# ring couplering...

  • Page 93: Technical Specifications

    PACSystems Ethernet Switch SLM080 User Manual Section 8 GFK-3125A Jan 2020 Section 8: Technical Specifications Emerson Switch Model SLM080 Physical Ports 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX Technology IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol...
  • Page 94 PACSystems Ethernet Switch SLM080 User Manual Section 8 GFK-3125A Jan 2020 Emerson Switch Model SLM080 Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Supports Q-in-Q VLAN for performance & security to expand...
  • Page 95 PACSystems Ethernet Switch SLM080 User Manual Section 8 GFK-3125A Jan 2020 Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via Warning / Monitoring System email Event selection support RS-232 Serial Console Port RS-232 in RJ45 connector with console cable.

  • Page 96: General Contact Information

    Note: If the product is purchased through an Authorized Channel Partner, please contact the seller directly for any support. Emerson reserves the right to modify or improve the designs or specifications of the products mentioned in this manual at any time without notice. Emerson does not assume responsibility for the selection, use or maintenance of any product.

Table of Contents