PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
SNMPV3
5.2.5
Figure 33: SNMPV3
The following table describes the labels in this screen
Label
Context Table
User Table
Web Management
Description
Configure SNMP v3 context table. Assign the context name of
context table. Click "Apply" to change context name
1. Configure SNMP v3 user table.
2. User ID: set up the user name.
3. Authentication Password: set up the authentication password.
4. Privacy Password: set up the private password.
5. Click "Add" to add context name.
6. Click "Remove" to remove unwanted context name.
Section 5
Jan 2020
46