Port Setting; Port Control - Emerson PACSystems SLM080 User Manual

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
5.1.4.4

Port Setting

Port Control

5.1.4.4.1
By this function, you can set the state, speed/duplex, flow control, and security of the port .
Figure 20: Port Control
The following table describes the labels in this screen.
Label
Port NO.
State
Speed/Duplex
Flow Control
Security
Apply
Web Management
Description
Port number for setting.
Enable/Disable the port .
You can set Auto-negotiation, 100-full, 100-half, 10-full, 10-half
mode.
Support symmetric and asymmetric mode to avoid packet loss
when congestion occurred.
Enabled port security will disable MAC address learning in this port
. Thus only the frames with MAC addresses in port security list will
be forwarded, otherwise will be discarded.
Click " Apply " to activate the configurations.
Section 5
Jan 2020
33