Vlan Setting - Port Based - Emerson PACSystems SLM080 User Manual

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
The following table describes the labels in this screen.
Label
VLAN Operation Mode
GVRP Mode
Management VLAN ID
Port
Link type
Untagged VID
Tagged VIDs
Apply
5.2.3.1 VLAN Setting – Port Based
Packets can go among only members of the same VLAN group. Note all unselected ports are treated as
belonging to another single VLAN. If the port-based VLAN enabled, the VLAN-tagging is ignored.
Figure 29: VLAN Setting
Web Management
Description
Configure VLAN Operation Mode: disable, Port Base,802.1Q
Enable/Disable GVRP function.
Management VLAN can provide network administrator a secure
VLAN to management Switch. Only the devices in the
management VLAN can access the switch.
Select the port to configure.
There are 3 types of link type:
Set the port default VLAN ID for untagged devices that
Access Link: single switch only, allows you to group ports
connect to the port . The range is 1 to 4094.
Set the tagged VIDs to carry different VLAN frames to other
by setting the same VID.
switch.
Click " Apply " to set the configurations.
Trunk Link: extended application of Access Link, allows you
to group ports by setting the same VID with 2 or more
switches. Hybrid Link: Both Access Link and Trunk Link are
available. Hybrid(QinQ) Link: enable QinQ mode allow you to
insert one more VLAN tag in a original VLAN frame.
Section 5
Jan 2020
42