Emerson PACSystems SLM080 User Manual page 43

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
Group Table
Access Table
MIBview Table
Help
Web Management
1. Configure SNMP v3 group table.
2. Security Name (User ID): assign the user name that you have
set up in user table.
3. Group Name: set up the group name.
4. Click "Add" to add context name.
5. Click "Remove" to remove unwanted context name.
1. Configure SNMP v3 access table.
2. Context Prefix: set up the context name.
3. Group Name: set up the group.
4. Security Level: select the access level.
5. Context Match Rule: select the context match rule.
6. Read View Name: set up the read view.
7. Write View Name: set up the write view.
8. Notify View Name: set up the notify view.
9. Click "Add" to add context name.
10. Click "Remove" to remove unwanted context name.
1. Configure MIB view table.
2. ViewName: set up the name.
3. Sub-Oid Tree: fill the Sub OID.
4. Type: select the type – exclude or included.
5. Click "Add" to add context name.
6. Click "Remove" to remove unwanted context name.
Show help file.
Section 5
Jan 2020
47