Table of Contents
Advertisement
PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
Show RSTP algorithm result at this table
Figure 27: Port Setting
Label
Path Cost (1-200000000)
Port Priority (0-240)
Admin P2P
Admin Edge
Admin Non STP
Apply
Web Management
Description
The cost of the path to the other bridge from this transmitting
bridge at the specified port . Enter a number 1 through
200000000.
Decide which port should be blocked by priority in LAN. Enter a
number 0 through 240. The value of priority must be the
multiple of 16
Some of the rapid state transactions that are possible within
RSTP are dependent upon whether the port concerned can only
be connected to exactly one other bridge (i.e. It is served by a
point-to-point LAN segment), or it can be connected to two or
more bridges (i.e. It is served by a shared medium LAN
segment). This function allows the P2P status of the link to be
manipulated administratively. True means P2P enabling. False
means P2P disabling.
The port directly connected to end stations, and it cannot
create bridging loop in the network. To configure the port as an
edge port , set the port to " True " .
The port includes the STP mathematic calculation. True is not
including STP mathematic calculation. False is including the STP
mathematic calculation.
Click " Apply " to set the configurations.
Section 5
Jan 2020
40
Advertisement
Table of Contents
