Ip Setting - Emerson PACSystems SLM080 User Manual

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A

IP Setting

You can configure the IP Settings and DHCP client function through IP configuration.
Figure 12: IP Setting
The following table describes the labels in this screen.
Label
DHCP Client
IP Address
Subnet Mask
Gateway
DNS1
DNS2
Apply
IP Address
Web Management
Description
To enable or disable the DHCP client function. When DHCP client
function is enabling, the switch will be assigned the IP address
from the network DHCP server. The default IP address will be
replaced by the IP address which the DHCP server has assigned.
After clicking " Apply " button, a popup dialog shows up to inform
when the DHCP client is enabling. The current IP will lose and you
should find a new IP on the DHCP server.
Assign the IP address that the network is using. If DHCP client
function is enabling, you do not need to assign the IP address. The
network DHCP server will assign the IP address for the switch and
it will be display in this column. The default IP is 192.168.0.100
Assign the subnet mask of the IP address. If DHCP client function
is enabling, you do not need to assign the subnet mask
Assign the network gateway for the switch. The default gateway is
192.168.0.254
Assign the primary DNS IP address
Assign the secondary DNS IP address
Click " Apply " to activate the configurations.
Assign the IP address that the network is using. If DHCP client
function is enabling, you do not need to assign the IP address. The
network DHCP server will assign the IP address for the switch and
it will be display in this column. The default IP is 192.168.0.100
Assign the subnet mask of the IP address. If DHCP client function
Section 5
Jan 2020
23