Basic Setting; Switch Setting - Emerson PACSystems SLM080 User Manual

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
Enable Location Alert
When enabling, click Enable Location Alert, Pwr1, Pwr2, and Pwr3 LEDs of the switch will start to
flash together, and click Disable Location Alert, the LEDs will stop flashing. Front Panel
Show the panel of Switch. Click Close to close panel on web.
5.1.3

Basic setting

5.1.3.1

Switch Setting

Figure 10: Switch Setting
The following table describes the labels in this screen.
Label
System Name
System Description
System Location
System Contact
System OID
Firmware Version
Kernel Version
MAC Address
Web Management
Description
Assign the name of switch. The maximum length is 64 bytes
Display the description of switch.
Assign the switch physical location. The maximum length is 64
bytes
Enter the name of contact person or organization
Display the SNMP Object ID of enterprise private MIB.
Display the switch ' s firmware version
Display the kernel software version
Display the unique hardware address assigned by manufacturer
(default)
Section 5
Jan 2020
21