Table of Contents
Advertisement
PACSystems Ethernet Switch SLM042 User Manual
GFK-3125A
5.2.9.4
Port Monitoring
Port monitoring function supports TX (egress) only, RX (ingress) only, and both TX/RX monitoring. TX
monitoring sends any data that egress out checked TX source ports to a selected TX destination port as
well. RX monitoring sends any data that ingress in checked RX source ports out to a selected RX
destination port as well as sending the frame where it normally would have gone. Note that keep all
source ports unchecked in order to disable port monitoring.
Figure 53: Port Monitoring
The following table describes the labels in this screen.
Label
Destination Port
Source Port
TX
RX
Apply
Clear
Help
Web Management
Description
The port will receive a copied frame from source port for monitoring
purpose.
The port will be monitored. Mark the blank of TX or RX to be monitored.
The frames come into switch port .
The frames receive by switch port .
Click " Apply " to activate the configurations.
Clear all marked blank.(disable the function)
Show help file.
Section 5
Jan 2020
66
Advertisement
Table of Contents
