Front Panel Leds - Emerson PACSystems SLM080 User Manual

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
4. LED for R.M (Ring master). When the LED light on, it means that the switch is the ring master of
Redundant Ring.
5. LED for Ring. When the led light on, it means the Redundant Ring is activated.
6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.
7. 10/100Base-T(X) Ethernet ports..
8. LED for Ethernet ports ACT status.
9. LED for Ethernet ports Link status.
3.2

Front Panel LEDs

LED
PW1
PW2
PW3
R.M
Ring
Fault
10/100Base-T(X) Fast Ethernet ports
LNK / ACT
Full Duplex
ACT
LNK
Hardware Overview
Color Status
Green On
Green On
Green On
Green On
On
Slowly blinking
Green
Fast blinking
Amber On
On
Green Blinking
Amber On
Description
DC power module 1 activated.
DC power module 2 activated.
Power jack activated.
Redundant Ring Master.
Redundant Ring enabled.
Redundant Ring topology has problem
Redundant Ring work normally.
Fault relay. Power failure or Port down/fail.
Port link up.
Data transmitted.
Port works under full duplex.
Section 3
Jan 2020
5