Commands Set List-Port Commands Set - Emerson PACSystems SLM080 User Manual

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
6.3 Commands Set List―Port Commands Set
SLM080 Commands
interface fastEthernet
[Portid]
duplex
[full | half]
speed
[10|100|1000|auto]
flowcontrol mode
[Symmetric|Asymmetri
c]
no flowcontrol
security enable
no security
Command Line Interface Management
Level Description
Choose the port for modification.
G
Use the duplex configuration
command to specify the duplex
mode of operation for Fast Ethernet
.
I
Use the speed configuration
command to specify the speed
mode of operation for Fast
Ethernet., the speed can ' t be set to
1000 if the port isn ' t a giga port..
I
Use the flowcontrol configuration
command on Ethernet ports to
control traffic rates during
congestion.
I
I Disable flow control of interface
I Enable security of interface
Disable security of interface
I
Section 6
Jan 2020
Example
switch(config)#interface
fastEthernet 2
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
switch(config)#interface
fastEthernet 2 switch(config-
if )#flowcontrol mode
Asymmetric
switch(config-if)#no
flowcontrol
switch(config)#interface
fastEthernet 2 switch(config-
if)#security enable
switch(config)#interface
fastEthernet 2
switch(config-if)#no security
switch(config)#interface
76