Table of Contents
Advertisement
PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
5.1.3.3
LLDP
LLDP (Link Layer Discovery Protocol) function allows the switch to advertise its information to other
nodes on the network and store the information it discovers.
Figure 14: LLDP
The following table describes the labels in this screen.
Label
LLDP Protocol
LLDP Interval
Apply
Help
5.1.3.4
5.1.4.6 Auto Provision
Auto Provision allows you to update the switch firmware automatically. You can put firmware or
configuration file on TFTP server. When you reboot the switch, it will upgrade automatically. Before
updating, make sure you have your TFTP server ready and the firmware image and configuration file is
on the TFTP server.
Figure 15: Auto Provision
Web Management
Description
" Enable " or " Disable " LLDP function.
The interval of resend LLDP (by default at 30 seconds)
Click " Apply " to set the configurations.
Show help file.
Section 5
Jan 2020
28
Advertisement
Table of Contents
