Emerson PACSystems SLM080 User Manual page 54

PACSystems Ethernet Switch SLM080 User Manual
GFK-3125A
The following table describes the labels in this screen.
Label
802.1x Portocol
Radius Server IP
Server port
Account port
Shared Key
NAS, Identifier
Advanced Setting
Quiet Period
Tx Period
Supplicant Timeout
Server Timeout
Max Requests
Re-Auth Period
Apply
Help
Web Management
Description
Enable or Disable 802.1X Radius Server function .
The IP address of the authentication server.
Set the UDP port number used by the authentication server to
authenticate.
Set the UDP destination port for accounting requests to the
specified Radius Server.
A key shared between this switch and authentication server.
A string used to identify this switch.
Set the time interval between authentication failure and the start
of a new authentication attempt .
Set the time that the switch can wait for response to an EAP
request/identity frame from the client before resending the
request .
Set the period of time the switch waits for a supplicant response
to an EAP request .
Set the period of time the switch waits for a Radius ser ver response
to an authentication request .
Set the maximum number of times to retry sending packets to the
supplicant .
Set the period of time after which clients connected must be re-
authenticated.
Click " Apply " to set the configurations.
Show help file.
Section 5
Jan 2020
58