Angelo Po 090BM1G Use And Installation Manual page 32

Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1), while keeping button (B) pressed, to
light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
Turning off
1 - Turn the knob (A) clockwise (pos. 3) to turn the
burner off.
The pilot light will remain on to allow the burner
to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
To carry out this operation, proceed as follows.
IT
Filling
1 - Check that the knob (A) is in th e "well closed"
position.
GB
2 - Press the button (B) to fill the well with water up
to the level marker (C).
DE
FR
FR
ES
English
SWITCHING THE APPLIANCE ON AND OFF
FILLING AND EMPTYING THE WELL
A
IDM-39615800600.tif
B
A
- 8 -
1
2
3
4
IDM-39615800700.tif
A
B
C