Angelo Po 090BM1G Use And Installation Manual page 40

ASSEMBLY APPLIANCES IN BANKS
To assemble appliances in banks (side by side)
proceed as described below.
1 - Pull off the knob (A).
2 - Undo the scr ews (C) and remo ve the control
panels (B).
3 - Remove the "insulation retainer" , if fitted.
4 - Apply masking tape to the edges to be placed
side by side.
5 - Apply food-approved sealant to the edges to be
placed side by side.
6 - Place the appliances side by side.
7 - Connect the appliance using the screws and
nuts (D-E).
8 - Remove the excess sealant and the masking
tape.
9 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
10 - Replace the "insulation retainer" , if fitted.
11 - Replace the con trol panels (B) and the
knobs (A) on completion of the operation.
A variety of optional installation kits are avail-
able for arranging appliances in banks:
G)"Over cupboard" installation kit
H)"Bridge" installation kit
L) Supporting beam kit
IT
GB
DE
G
FR
ES
English
A
B
D
H
- 16 -
C
F
E
IDM-39614501200.tif
L
IDM-39614501300.tif