Angelo Po 090BM1G Use And Installation Manual page 29

TECHNICAL DATA
See tables and "Conne ction chart" at the back of
the manual.
SAFETY DEVICES
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Safety thermocouple: cuts out the gas supply if the
flame goes out.
C)Safety thermostat: cuts off the gas supply in case of
overheating.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)General hazard: read the manual carefully before
carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: dry operation is forbidden.
E)General hazard: all r elevant regulations must be
complied with. "Install in compliance with the rele-
vant regulations and use in well ventilated premises
only".
F) General hazard: all r elevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and comm ission-
ing instructions".
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
C
C D
B
- 5 -
B
A
IDM-39615800300.tif
E
F
A
IDM-39615800400.tif
IT
GB
DE
G
FR
ES
English