Angelo Po 090BM1G Use And Installation Manual page 33

Emptying
1 - Place a container of suitab le size un derneath
the drain pipe (D).
2 - Use the knob (A) to turn on the tap and empty
the well.
3 - Return the knob to its original position once the
well has been drained.
RESETTING THE APPLIANCE
If the safety thermostat is tripped, the appliance has
to be restored to the initial working conditions as fol-
lows.
1 - Press the button (A) of the safety thermostat to
restore the gas supply.
LENGTHY DOWNTIMES OF APPLIANCE
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
1 - Cut off the mains electricity supply using the ap-
pliance's master switch.
2 - Turn off the gas supply tap.
3 - Clean the appliance and the surrounding areas
thoroughly.
A
A
4 - Spread a film of edible o il over the stainless
steel surfaces.
5 - Carry out all the servicing procedures.
6 - Leave the appliance uncovered and the cook-
ing chambers open.
- 9 -
D
IDM-39615800800.tif
IDM-39615800900.tif
IT
GB
DE
FR
ES
English