baltur GI Series Instruction page 19

- Before using the burner for the first time please carefully read the chapter "WARNINGS NOTES FOR THE USER : HOW
TO USE THE BURNER SAFELY" in this instruction manual, which is an integral and essential part of the product.
The works on the burner and on the esystem have to be carried out only by competent people.
- Read carefully the instructions before starting the burner and service it.
- The system electric feeding must be disconnected before starting working on it.
- If the works are not carried out correctly it is possible to cause dangerous accidents.
We hereby declare under our own responsibility, that our "CE" marked products
Series:
Sparkgas...; BTG...; BGN...; Minicomist...; Comist...; RiNOx..., BT...; BTL...;
GI...; GI...Mist; PYR...; TS...
Description:
domestic and industrial blown air burners fired by gas, oil and dual fuel respect the
minimal regulation of the European Directives:
• 90/396/EEC (G.A.D)
• 92/42/EEC (B.E.D)
• 89/336/EEC (E.M.C. Directive)
• 73/23/EEC (Low Voltage Directive)
• 98/37 EEC (Machinery Directive)
and have been designed and tested in accordance with the European Standards:
• EN 676 (gas and dual fuel, gas side)
• EN 267 (light oil and dual fuel, oil side)
• EN 60335-1, 2003
• EN 50165: 1997 + A1:2001
• EN 55014 -1 (1994) and –2 (1997)
Surveillance accordingly Gas Appliances Directive 90/396/EEC made by:
CE0085 - DVGW
- Warning notes for the user ............................................................................................................................"
- Technical data ..............................................................................................................................................."
- Fastening the burner to the boiler .............................................................................................................."
- Electrical connections - Gas feed system at average pressure ..................................................................."
- General - Description of operations at 2-stage progressive ........................................................................."
- Description of operation at modulation flame - Starting up and regulation with methane gas ....................."
- Combustion check - Adjusting air flow to the burner head ............................................................................"
- Differential air pressure switch working - Differential gas pressure switch working ......................................"
- Air / gas principle diagram ............................................................................................................................"
- Instructions for setting gas valve .................................................................................................................."
- Electric wiring diagram .................................................................................................................................."
Statement of Conformity
The Vice President and Managing Director:
1 / 16
0006081361_200805
Dr. Riccardo Fava
E
N
G
L
I
S
H
2
4
6
7
8
9
11
13
14
15
67