Viewing Parameters And Diagnosis; Previewing Ecg Report - EDAN SE-1010 User Manual

SE-1010 PC ECG User Manual

5.3 Viewing Parameters and Diagnosis

Double-click on a parameter, and then you can modify it. Then click on the Save button to save
the modifications.
These parameters are as follows.
Designation
Heart Rate (bpm)
P (ms)
PR (ms)
QRS (ms)
QT/QTc (ms)
P/QRS/T (deg.)
RV5/SV1 (mV)
RV5+SV1 (mV)
RV6/SV2 (mV)
Enter your own opinions in the Diagnosis textbox, and then click on the Save button.
If the Integration function is activated, the data can be uploaded to Smart ECG Net system after
you click on the Save button.

5.4 Previewing ECG Report

Click on
1. Click on Previous Page/Next Page to switch to the previous/next preview page.
2. Click on Zoom In/ Zoom Out to magnify/minify the preview page.
3. Click on Print to print the report.
4. Click on Close to close the normal ECG preview screen and return to the previous screen.
NOTE: The report title is in one line by default, you can also change the line to two lines.
Find the text named PCECG.ini in the installation path, modify LineofTitle=0 to
LineofTitle=1, and then save the text to change the line to two lines.
Description
Heart Rate
P-wave duration of the current lead
P-R interval of the current lead
QRS complex duration of the current lead
Q-T interval of the current lead/Normalized QT interval
Dominant direction of the average integrated ECG vectors
The amplitude of R wave of V5 lead/the amplitude of S
wave of V1 lead
The amplitude of R wave of V5 lead plus the amplitude of
S wave of V1 lead
The amplitude of R wave of V6 lead/the amplitude of S
wave of V2 lead
to display the normal ECG preview screen.
- 35 -
Analyzing ECG Data