Advanced Setup - EDAN SE-1010 User Manual

SE-1010 PC ECG User Manual
Item
Sampling Device

8.4 Advanced Setup

Click on Advanced Setting, input the correct password in the pop-up textbox, and then click on
the OK button.
Click on the Access Network Setting tab to open the Access Network Setting window.
Item
Enable System
Integration
Device ID, Output
Path, WebService IP
and FTP IP
Description
Choose from: DP10 Wired Sampling Box, DP12 Wired Sampling Box,
DX12 Wireless Sampling Box, SE Serial Machine or
DEMO
Select DX12 wireless sampling box, you can click on the Address button
to view the address. Select the viewed address on the screen of DX12
transmitter to match DX12 transmitter with tablet PC.
Figure 8-4 Access Network Setup Window
Description
Select this item to enable system integration features. Meanwhile, the
Acquire button appears in the Patient Information window.
Set Device ID, Output Path, WebService IP and FTP IP to the
Device ID, Output Path, WebService IP and FTP IP of Smart ECG Net
system. Otherwise, ECG data cannot be uploaded to Smart ECG Net
system normally.
- 52 -
Configuring the System