EDAN SE-1010 User Manual page 16

SE-1010 PC ECG User Manual
Front Panel
Name
Lamp
USB Socket
USB Socket
Definitions of corresponding pins:
Pin
1
2
3
4
5
1. When the computer connected to the USB cable is powered on, do not connect the
USB cable to the DP12 ECG sampling box; when the system is powered on, do not
disconnect the USB cable from the ECG sampling box.
2. It is not necessary or recommended to regularly disconnect the USB cable from the
DP12 ECG sampling box. Disconnect the USB cable from the PC if necessary.
Lamp
Explanation
When the ECG sampling box is powered by the PC, the lamp
will be lit.
Connecting to the USB socket of the PC with a USB cable
Signal
GND
VCC
QRS
GND
GND
WARNING
USB Socket
Pin
6
7
8
9
10
- 10 -
Introduction
Signal
GND
GND
GND
D-
D+