SE-1010 PC ECG User Manual
You can set the unit, print, frequency of AC and the saving path of source data based on your
needs. Click on the OK button after setup, the system will enter the main screen automatically.
NOTE: You should install the software to the saving path of source data after the
uninstallation and reinstallation; otherwise, the software needs a new
configuration.
6.1 Viewing Lead Placement Information
1. Click on the Lead Placement button on the main screen to display the Lead Placement
window.
2. Click on Wilson lead system, Frank lead system or Exercise ECG lead system to view the
lead placement information in the corresponding system.
Operation Instructions for Resting ECG
- 43 -