SE-1010 PC ECG User Manual
Chapter 4 Sampling Resting ECG
Double-click on
NOTE: Do not use other software when using PC ECG software.
If you use PC ECG software for the first time, the following window will be displayed.
You can set the unit, print, frequency of AC and the saving path of source data based on your
needs. Click on the OK button after setup, the system will enter the main screen automatically.
NOTE: You should install the software to the saving path of source data after the
uninstallation and reinstallation; otherwise, the software needs a new
configuration.
on the desktop to display the main screen.
Figure 4-1 Toolbar of Main Screen
Figure 4-2 Initial Window
- 26 -
Sampling Resting ECG