Syncing For The First Time - AgaMatrix iBGStar Owner's Manual

12

Syncing for the First Time

Before syncing for the first time, the iBGStar Diabetes Manager
Application must be installed on your iPhone or iPod touch.
For instructions on installing the app refer to Chapter 3.
Ensure that the time and date is properly set on your iPhone
or iPod touch before syncing your meter to the app. For
instructions on how to set the time and date on your iPhone or
iPod touch, refer to the support materials for each device.
Tap the iBGStar Diabetes Manager Application icon on your
iPhone or iPod touch to launch the app.
Connect your meter to your iPhone or iPod touch by inserting
the iBGStar Meter's dock connector into the iPhone or iPod
touch's dock connector port. The dock connector port is
located below the home button of either device.
60
Example Result:
If your meter is already connected to the iPhone or iPod touch,
then launch the app. If you have an iPhone or iPod touch
with a Lightning Connector, (ie, iPhone 5 or iPod touch 5),
an adapter is necessary to sync your iBGStar meter with the
app. The Apple Lightning Adapter or Apple Lightning Cable
Adapter (0.2m) are the recommended adapters for syncing
your iBGStar Meter to the app:
[1] Insert the Lightning Adapter into the iPhone or iPod touch
Lightning Connector.
[2] Insert the iBGStar meter into the Lightning Adapter
(already attached to the iPhone or iPod touch).
The first time you connect an iBGStar meter to the iBGStar
App on your iPhone or iPod touch, you will be prompted with
a message. It will ask if you want to download readings from
this meter.
Select "Sync" to download data from the meter to the app
on your iPhone or iPod touch. The app will begin syncing
with your meter. During every sync, any new data will be
downloaded from the meter to the app. Syncing will also set
the meter to match the iPhone or iPod touch's time and date.
Select "Cancel" to cancel the download. The meter will not
sync with the app. You may disconnect the meter from the
iPhone or iPod touch.
You must sync your iBGStar meter to the iBGStar Diabetes
Manager Application to set your meter's time and date to be
able to download readings from your meter to the app.
61