AgaMatrix iBGStar Owner's Manual page 25

Table of Contents

Advertisement

Set the Lancing Level:
The BGStar Lancing Device offers 8 depth settings. Rotate the
dial to the desired setting as shown in the depth indicator
window. Level 1 is the shallowest; level 8 is the deepest. If you
have never lanced before, it is recommended that you start at
level 3.
Cock the Handle:
Pull the cocking handle out until it clicks. You may have
already cocked the handle accidentally while inserting the
lancet; this is OK. The lancing device is now ready for use.
[2] Launching the App and Connecting (Skip to step [3] if
testing without the app):
Tap the iBGStar Diabetes Manager Application icon on your
iPhone or iPod touch to launch the app. The app will display
the most recent scorecard.
46
Connect your meter to your iPhone or iPod touch by inserting
the meter's dock connector into the iPhone or iPod touch's dock
connector port. The dock connector port is located below the home
button of either device. Your meter and the app will sync upon
connection. The battery status and charging battery symbol will
appear on your meter's display.
Example Results:
If your iBGStar meter is already connected to the iPhone or iPod
touch, then launch the app to begin syncing between your meter
and the app.
[3] Insert a New BGStar Test Strip:
Insert a new BGStar Test Strip into the meter's test strip port. Make sure
you insert the test strip, with the contact bars facing towards you, into
the test strip port. You cannot perform a test while a cable is plugged
into the micro-USB port and the meter's battery is charging.
With iPhone or iPod touch:
Without iPhone or iPod touch:
47

Advertisement

Table of Contents
loading

Table of Contents