AgaMatrix iBGStar Owner's Manual page 6

IMPORTANT: Use BGStar Blood Glucose Test Strips only once.
Only use BGStar Test Strips with the BGStar or iBGStar Blood
Glucose Monitoring System(s).
Important test strip information:
[1] Store the BGStar Blood Glucose Test Strip vial in a cool, dry
place at 46°F to 86°F (8°C to 30°C).
[2] Use BGStar Blood Glucose Test Strips only within the
system operating temperature range of 50°F to 104°F (10°C
to 40°C).
[3] Keep away from direct sunlight and heat.
[4] Store your BGStar Blood Glucose Test Strips in their original
vial only. Never store them in another vial, any other container
or outside the vial.
[5] With clean, dry hands you may gently handle the BGStar
Blood Glucose Test Strip when removing it from the vial or
inserting it into the iBGStar.
[6] After removing a BGStar Blood Glucose Test Strip from the
vial, immediately close the vial cap tightly.
[7] Do not use BGStar Blood Glucose Test Strips beyond the
expiration date or 180 days after first opening the vial. This
may cause inaccurate results. Write the discard date (180 days
from the first opening) on the test strip vial.
[8] Do not bend, cut or alter BGStar Blood Glucose Test Strips.
8
[9] Apply only fresh capillary blood or control solution to the
sample area of the BGStar Blood Glucose Test Strip.
About the Micro-USB to USB Cable and Power Adapter
(1) Micro-USB to USB Cable: Used to connect the meter to
the power adapter or a PC.
(2) Micro-USB Connector (Cable): This end inserts into the
meter's micro-USB port.
(3) USB Connector (Cable): This end inserts into the power
adapter or a PC's USB port.
(4) Power Adapter: Used to charge your meter. It will also
charge the iPhone or iPod touch, if the meter is connected
to the iPhone or iPod touch. Insert plug into a wall outlet
(100-240v, 50-60 Hz).
(5) Power Adapter's USB Port: Used to connect to the
iBGStar meter via the micro-USB to USB cable.
2
1
3
4
5
9