AgaMatrix iBGStar Owner's Manual page 20

If your meter is connected to your iPhone or iPod touch and the app
is launched, the app will play an animation of a sample being applied
to a test strip.
The IBGStar Blood Glucose Monitoring System is now ready for you
to apply control solution. You do not need to set a calibration code
for the meter.
Note: If you connect your meter to your iPhone or iPod touch and
insert a test strip into the meter before launching the app, the app
will not play an animation of a sample being applied to a test strip.
If you do not start the test within 4 minutes of inserting a test strip,
the meter will display the battery status and charging symbol. To
continue testing, take out the unused BGStar Test Strip. Reinsert the
test strip into the meter. Avoid touching the test strip's sample area
(where control solution should be applied).
[4] Applying Control Solution:
• Shake the control solution bottle.
• Discard the first drop of control solution.
• Wipe the bottle tip clean using a clean tissue or paper towel.
• Dispense a second drop onto a clean surface, such as an unused
resealable plastic bag.
• Bring the tip of the test strip to the control solution sample.
The iBGStar Blood Glucose Monitoring System will automatically
detect if a test is performed with BGStar Control Solution.
36
This is the visual
fi ll window. Do not
put Control
Solution here.
APPLY CONTROL
SOLUTION HERE.
[5] Remove Test Strip From Control Solution Sample When
the Test Strip's Visual Fill Window Completely Turns Blue:
Sample applied symbol:
The sample applied symbol will appear on the iBGStar meter's
screen. Your iPhone or iPod touch will beep when you should
remove the test strip from the control solution sample. It will
only beep if your meter is connected to your iPhone or iPod
touch, the app is launched, and Sounds have been activated
in the Settings menu of your iPhone or iPod touch and the
device's volume level is audible.
The Calculating Animation (a sequence of bars and 1,2,3)
will begin on the meter display. This animation means that
a sample has been applied to the test strip and the meter is
calculating the test result.
In addition, if your meter is connected to your iPhone or iPod
touch and app, the app will display an animation showing
that the meter is calculating the test result.
1
The entire visual fi ll
window will turn blue.
Calculating Animation:
1
2
3
37